Created a Burr puzzle out of aluminum. Each blocks measures roughly 1.3in by 1.3in by 4in.
Using a specific assembly order, the parts will become locked in by the final piece. Machined on a vertical mill over the course of about 18 hours. Tolerances turned out well as there is little unwanted movement.
Abstract fox welding project. Students exchanged designs, making the other person's project. I fabricated this fox that a fellow student, Kawah Wong, designed.
I TIG welded float valves for a water heating application while working at Abacorp CNC.
Close up of fused TIG weld on stainless steel.
This shifter surround trim plate was machined in house while I was at Abacorp CNC before being sent out to get anodized then coming back for the final touches. This can be found on Hurst edition Dodge Challengers.
gLike
Metal Working/Welding
Various projects I have made by machining, welding or other metal working methods.
I also have experience operating mills and lathes to machine brass, steel, aluminum and ABS. I have welded both aluminum and steel using MIG, TIG and Stick but is most proficient using MIG
Timothy Halsch
Mechanical Engineering Technology student at Rochester Institute of Technology
Rochester, NY