FTR
Build by BOX6 (Schmiddy and me) as private project to make the 80's Honda FT500 more Street-Tracker.
For this we shortened the rear frame, made a new tailpiece out of aluminium.
A new sporty mask, also made out of aluminium, cleaned up the side by removing the air box and relocating the battery and electrics.
The front was shortened using Honda parts and the Marzzochi shocks, that came with the Orangina, where rebuild.
The motor was used as a daily driver but we took it apart for a check-up and new seals. We took out the balancer shafts, cleaned up the ports and made a new Stainless-steel header set with e-mark muffler to get it all legal in Germany.
The total build took about 500 hours, done in the winter of 2014-15 and 2015-16.
The FTR project started at the same time as Orangina but was postponed due to an other project.
The FTR was finished in June 2016.
Pictures taken by me in Germany.
