Cubba-Bubba 5 in 1 chair - Here you can see my last furniture designs
Elaxa chair - Here you can see my last furniture designs
X-one chair - Here you can see my last furniture designs
Zig-Zag chair - Here you can see my last furniture designs
Forward chair - Furniture design - Here you can see my last furniture designs
Forward table - Furniture design - Here you can see my last furniture designs
Cala chair
Cala chair transparent
Cala chair
Leko lounge chair
Leko family - upholstered version
Leko family - upholstered version
Flow chair
The queen - martini coctail glass
Shell
EKZO - A lounge chair for gaming, relaxing, etc. Fiberglass with fabric
Pantonino chair
Pantonino v2 chair
Evolve chair
Lovely chair barstool
Lovely chair family
Fur - two seat sofa
Comfort lounge chair
Arc chair
Baroque chair
Bora chair
HAVANA lounge chair
Toreador chair
SPRING - Simple cafe table
SPRING - Simple cafe table
LEKO - for exterior use
Cap table - simple - Simple 80X40cm table, with a glass top. You can easily change the level of the glass to suit your needs. Material: MDF - gloss in different colors.
Cap table - simple - Simple 80X40cm table, with a glass top. You can easily change the level of the glass to suit your needs. Material: MDF - gloss in different colors.
Cap table - simple - Simple 80X40cm table, with a glass top. You can easily change the level of the glass to suit your needs. Material: MDF - gloss in different colors.
The Book Lounge - This is an old idea for attractive chair with hot magazine covers and articles on it. Good for a fancy office or something ;)
Fiberglass and upholstery.
Ring Lounge chair - Simple idea, composite base and frame with upholstered seat. The depth of the seat is about 50 cm.
You can see here the smooth and the "diamond" version also. I am working on a design with metal base, will upload it later.
C&C welcomed as always :)
Ring Lounge chair - Simple idea, composite base and frame with upholstered seat. The depth of the seat is about 50 cm.
You can see here the smooth and the "diamond" version also. I am working on a design with metal base, will upload it later.
C&C welcomed as always :)
Ring Lounge chair - Some more colour variations with a few swarovski crystals :)
Ring Lounge chair - Some more colour variations with a few swarovski crystals :)
Ring set - ring chair - This is the chair for the Ring set.
Fiberglass and upholstery, 16 mm steel tube frame for the base.
Ring set - ring chair - This is the chair for the Ring set.
Fiberglass and upholstery, 16 mm steel tube frame for the base.
Ring set - ring chair - This is the chair for the Ring set.
Fiberglass and upholstery, 16 mm steel tube frame for the base.
The Kiss Lounge chair - Fiberglass and upholstery with metal tubular base (chromium finish)
It is a part of my "Kiss for home" series - will post the concept later on
The Kiss Lounge chair - Fiberglass and upholstery with metal tubular base (chromium finish)
It is a part of my "Kiss for home" series - will post the concept later on
The Kiss Lounge chair - Fiberglass and upholstery with metal tubular base (chromium finish)
It is a part of my "Kiss for home" series - will post the concept later on
Plane Lounge chair - The chair from today :) - Plane Lounge chair
For interior or exterior use - fiberglass and upholstery
Stackable also.
Plane Lounge chair - The chair from today :) - Plane Lounge chair
For interior or exterior use - fiberglass and upholstery
Stackable also.
Plane Lounge chair - The chair from today :) - Plane Lounge chair
For interior or exterior use - fiberglass and upholstery
Stackable also.
Plane Lounge chair - The chair from today :) - Plane Lounge chair
For interior or exterior use - fiberglass and upholstery
Stackable also.
Z-chair - The Z-chair or the Zorro chair :)
Upholstered plastic/composite base with steel tube legs, easy to assemble and transportation. Version for exterior is also possible - without upholstery
The chair is stackable.
Z-chair - The Z-chair or the Zorro chair :)
Upholstered plastic/composite base with steel tube legs, easy to assemble and transportation. Version for exterior is also possible - without upholstery
The chair is stackable.
Z-chair - The Z-chair or the Zorro chair :)
Upholstered plastic/composite base with steel tube legs, easy to assemble and transportation. Version for exterior is also possible - without upholstery
The chair is stackable.
Z-chair - The Z-chair or the Zorro chair :)
Upholstered plastic/composite base with steel tube legs, easy to assemble and transportation. Version for exterior is also possible - without upholstery
The chair is stackable.
Retro Lounge chair - Today's chair, Retro lounge chair. Metal legs with composite upholstered body. The idea is comfort and sleek chair with a taste of the past. I am not totally happy with the design but will work it out lately :)
I am working on wooden leg also, will post it later.
Retro Lounge chair - Today's chair, Retro lounge chair. Metal legs with composite upholstered body. The idea is comfort and sleek chair with a taste of the past. I am not totally happy with the design but will work it out lately :)
I am working on wooden leg also, will post it later.
Retro Lounge chair - Today's chair, Retro lounge chair. Metal legs with composite upholstered body. The idea is comfort and sleek chair with a taste of the past. I am not totally happy with the design but will work it out lately :)
I am working on wooden leg also, will post it later.
Retro Lounge chair - Today's chair, Retro lounge chair. Metal legs with composite upholstered body. The idea is comfort and sleek chair with a taste of the past. I am not totally happy with the design but will work it out lately :)
I am working on wooden leg also, will post it later.
Retro Lounge chair - Retro lounge chair - fur version with wooden legs. Composite upholstered body. The idea is comfort and sleek chair with a taste of the past.
The TIE Lounge chair - Simple idea, it was really fun to do that :)
hope you like it. More variations to follow
The TIE Lounge chair - Simple idea, it was really fun to do that :)
hope you like it. More variations to follow
The TIE Lounge chair - Simple idea, it was really fun to do that :)
hope you like it. More variations to follow
The TIE Lounge chair - Simple idea, it was really fun to do that :)
hope you like it.
The TIE Lounge chair - Simple idea, it was really fun to do that :)
hope you like it.
The TIE Lounge chair - Simple idea, it was really fun to do that :)
hope you like it.
The TIE Lounge chair
The TIE Lounge chair - Fur version
The Flower lounge chair - The chair is made from composite with metal base. The upholstery is deep and soft, with maximum comfort.
I am working on new legs, will post them later here.
The Flower lounge chair - The chair is made from composite with metal base. The upholstery is deep and soft, with maximum comfort.
I am working on new legs, will post them later here.
The Flower lounge chair - The chair is made from composite with metal base. The upholstery is deep and soft, with maximum comfort.
I am working on new legs, will post them later here.
The Half Moon chair - The chair (dining chair) is designed to be cut with CNC router from plywood. The seat and the back are from bended plywood or flat plywood and upholstery.
The Half Moon chair - The chair (dining chair) is designed to be cut with CNC router from plywood. The seat and the back are from bended plywood or flat plywood and upholstery.
The Half Moon chair - The chair (dining chair) is designed to be cut with CNC router from plywood. The seat and the back are from bended plywood or flat plywood and upholstery.
The Half Moon chair - The chair (dining chair) is designed to be cut with CNC router from plywood. The seat and the back are from bended plywood or flat plywood and upholstery.
The Half Moon chair - The chair (dining chair) is designed to be cut with CNC router from plywood. The seat and the back are from bended plywood or flat plywood and upholstery.
The Half Moon chair - The chair (dining chair) is designed to be cut with CNC router from plywood. The seat and the back are from bended plywood or flat plywood and upholstery.
The Tube chair - Tube chair - from today. Simple metal and wood lounge chair. Tube 20mm and wire 11mm with wooden seat. There should be soft cover for the chair.
The Tube chair - Tube chair - from today. Simple metal and wood lounge chair. Tube 20mm and wire 11mm with wooden seat. There should be soft cover for the chair.
The Tube chair - Tube chair - from today. Simple metal and wood lounge chair. Tube 20mm and wire 11mm with wooden seat. There should be soft cover for the chair.
The Tube chair - Tube chair - from today. Simple metal and wood lounge chair. Tube 20mm and wire 11mm with wooden seat. There should be soft cover for the chair.
The Tube chair
The Zigzag Lounge chair - Metal and cloth chair. It is designed to be easy to carry and assemble/disassemble. The comfort is coming from the self forming seating - there is no hard parts under the body.
The Zigzag Lounge chair - Metal and cloth chair. It is designed to be easy to carry and assemble/disassemble. The comfort is coming from the self forming seating - there is no hard parts under the body.
The Zigzag Lounge chair - another shot
The Zigzag Lounge chair - The wooden version
The Zigzag Lounge chair - The wooden version
The Zigzag Lounge chair - The wooden version
The Zigzag Lounge chair - The wooden version
The Oval chair - Simple idea, will work over for the final version, that's it for now :)
The Oval chair - Simple idea, will work over for the final version, that's it for now :)
The Oval chair - Simple idea, will work over for the final version, that's it for now :)
The Oval chair - Simple idea, will work over for the final version, that's it for now :)
The Oval chair - different legs
The Oval chair - colors
The Piramide chair - The chair have to be made from flat sheets of plywood, steel tubes for the legs and some upholstery.
I am working on the wooden version also
The Piramide chair - The chair have to be made from flat sheets of plywood, steel tubes for the legs and some upholstery.
I am working on the wooden version also
The Piramide chair - The chair have to be made from flat sheets of plywood, steel tubes for the legs and some upholstery.
I am working on the wooden version also
The Piramide chair - the wooden version
Fold - the chair - It is a simple idea - four flat sheets of plywood or composite for foldable chair.
You can see the rest :)
Fold - the chair - It is a simple idea - four flat sheets of plywood or composite for foldable chair.
You can see the rest :)
Gramophone lounge chair - Metal or composite for the body, soft upholstery for full comfort.
Gramophone lounge chair - Metal or composite for the body, soft upholstery for full comfort.
Gramophone lounge chair - Metal or composite for the body, soft upholstery for full comfort.
Loop table - Dining table. Laser cut metal sheet and wood for the legs.
Loop table - Dining table. Laser cut metal sheet and wood for the legs.
Loop table - Dining table. Laser cut metal sheet and wood for the legs.
Sheet chair - Chair from a sheet of metal to cylinder and deformed to become a chair.
Sheet chair - Chair from a sheet of metal to cylinder and deformed to become a chair.
The Mirror hanger - Just a idea for a mirror and a hanger in one - for small apartments, studios, etc.
The Mirror hanger - Just a idea for a mirror and a hanger in one - for small apartments, studios, etc.
The Mirror hanger - Just a idea for a mirror and a hanger in one - for small apartments, studios, etc.
The Mirror hanger - Just a idea for a mirror and a hanger in one - for small apartments, studios, etc.
The Mirror hanger - Just a idea for a mirror and a hanger in one - for small apartments, studios, etc.
The Mirror hanger - Just a idea for a mirror and a hanger in one - for small apartments, studios, etc.
The Freeline lounge chair - This chair is made only from flat sheets of plywood. CNC cut and painted. It should be used with cushions. C&C welcome ;)
The Freeline lounge chair - This chair is made only from flat sheets of plywood. CNC cut and painted. It should be used with cushions. C&C welcome ;)
The Freeline lounge chair - This chair is made only from flat sheets of plywood. CNC cut and painted. It should be used with cushions. C&C welcome ;)
The Freeline lounge chair - This chair is made only from flat sheets of plywood. CNC cut and painted. It should be used with cushions. C&C welcome ;)
Contour lounge chair - wood - The wooden version of contour chair. Should be done from bended plywood, glued together to achieve ergonomic seating
Contour lounge chair - wood - The wooden version of contour chair. Should be done from bended plywood, glued together to achieve ergonomic seating
Contour lounge chair - wood - The wooden version of contour chair. Should be done from bended plywood, glued together to achieve ergonomic seating
The Contour lounge chair - Fiberglass and upholstery.
The Contour lounge chair - Fiberglass and upholstery.
The Contour lounge chair - Fiberglass and upholstery.
Contour lounge chair - wood - one more
The Wave chair - As a logical next step from The Contour Lounge chair.
Composite material int two color variant.
I am working on a set Wave. Will post it here when ready
The Wave chair - As a logical next step from The Contour Lounge chair.
Composite material int two color variant.
I am working on a set Wave. Will post it here when ready
The Wave chair - As a logical next step from The Contour Lounge chair.
Composite material int two color variant.
I am working on a set Wave. Will post it here when ready
My last works - some of my last works - i was too busy for the last 15 days, so uploading now ;)
My last works - some of my last works - i was too busy for the last 15 days, so uploading now ;)
My last works - some of my last works - i was too busy for the last 15 days, so uploading now ;)
My last works - some of my last works - i was too busy for the last 15 days, so uploading now ;)
My last works - some of my last works - i was too busy for the last 15 days, so uploading now ;)
My last works - some of my last works - i was too busy for the last 15 days, so uploading now ;)
My last works - some of my last works - i was too busy for the last 15 days, so uploading now ;)
My last works - last works
My last works - last works
My last works - last works
My last works - last works
My last works - last works
My last works - last works
My last works - last works
My last works - some last works
My last works - some last works
My last works - some last works
My last works - some last works
My last works - some last works
My last works - some last works
My last works - some last works
The Leaf Bar Stool - Bar stool concept. It should be made from two parts - the base and the seat. The material for the base is concrete (with leg support) with organic fibers. I am planning to use the same material for the seat also, with simple metal frame inside, upholstered for better comfort. There is a clean wire metal version available also, covered with a sheet of felt. I am still working on that project, will keep you informed :)
The Leaf Bar Stool - Bar stool concept. It should be made from two parts - the base and the seat. The material for the base is concrete (with leg support) with organic fibers. I am planning to use the same material for the seat also, with simple metal frame inside, upholstered for better comfort. There is a clean wire metal version available also, covered with a sheet of felt. I am still working on that project, will keep you informed :)
The Leaf Bar Stool - Bar stool concept. It should be made from two parts - the base and the seat. The material for the base is concrete (with leg support) with organic fibers. I am planning to use the same material for the seat also, with simple metal frame inside, upholstered for better comfort. There is a clean wire metal version available also, covered with a sheet of felt. I am still working on that project, will keep you informed :)
The Leaf Bar Stool - Bar stool concept. It should be made from two parts - the base and the seat. The material for the base is concrete (with leg support) with organic fibers. I am planning to use the same material for the seat also, with simple metal frame inside, upholstered for better comfort. There is a clean wire metal version available also, covered with a sheet of felt. I am still working on that project, will keep you informed :)
Shell lounge chair - I am thinking about prototype in aluminum. Really want to see it on live, i just don't know what it will take to do it in material. Hope you like it as well
The Arc table - The Arc table is part of the set ARC - coffee table, dinner table, chair, lounge chair and hopefully - sofa. I am presenting now the coffee table. Hope you'll enjoy it ;)
Material used: metal wire 11 mm. or wood 20X20mm and a glass top. The height is 45cm.
The Arc table - The Arc table is part of the set ARC - coffee table, dinner table, chair, lounge chair and hopefully - sofa. I am presenting now the coffee table. Hope you'll enjoy it ;)
Material used: metal wire 11 mm. or wood 20X20mm and a glass top. The height is 45cm.
The Arc table - The Arc table is part of the set ARC - coffee table, dinner table, chair, lounge chair and hopefully - sofa. I am presenting now the coffee table. Hope you'll enjoy it ;)
Material used: metal wire 11 mm. or wood 20X20mm and a glass top. The height is 45cm.
The Arc table - The Arc table is part of the set ARC - coffee table, dinner table, chair, lounge chair and hopefully - sofa. I am presenting now the coffee table. Hope you'll enjoy it ;)
Material used: metal wire 11 mm. or wood 20X20mm and a glass top. The height is 45cm.
The Arc table - The Arc table is part of the set ARC - coffee table, dinner table, chair, lounge chair and hopefully - sofa. I am presenting now the coffee table. Hope you'll enjoy it ;)
Material used: metal wire 11 mm. or wood 20X20mm and a glass top. The height is 45cm.
The Wave sofa set - #
This sofa set is pretty simple. Soft fabric upholstery over a metal frame. Two and three seat sofa available. I am working on a foot stool and lounge chair as well. Hope you like it :)
The Wave sofa set - #
This sofa set is pretty simple. Soft fabric upholstery over a metal frame. Two and three seat sofa available. I am working on a foot stool and lounge chair as well. Hope you like it :)
The Wave sofa set - #
This sofa set is pretty simple. Soft fabric upholstery over a metal frame. Two and three seat sofa available. I am working on a foot stool and lounge chair as well. Hope you like it :)
ARC table in production - in metal or wood - After 6 months of development and prototyping, ARC table is now in production - in metal and wood. Detailed information here: www.pured.co.uk - my design studio web page. Main idea behind the design is to have only one and the same detail - ARC. And it worked :)
The table was shown at 100% design and accumulated a lot of nice comments - especially the wooden version.
ARC table in production - in metal or wood - After 6 months of development and prototyping, ARC table is now in production - in metal and wood. Detailed information here: www.pured.co.uk - my design studio web page. Main idea behind the design is to have only one and the same detail - ARC. And it worked :)
The table was shown at 100% design and accumulated a lot of nice comments - especially the wooden version.
ARC table in production - in metal or wood - After 6 months of development and prototyping, ARC table is now in production - in metal and wood. Detailed information here: www.pured.co.uk - my design studio web page. Main idea behind the design is to have only one and the same detail - ARC. And it worked :)
The table was shown at 100% design and accumulated a lot of nice comments - especially the wooden version.
ARC table in production - in metal or wood - After 6 months of development and prototyping, ARC table is now in production - in metal and wood. Detailed information here: www.pured.co.uk - my design studio web page. Main idea behind the design is to have only one and the same detail - ARC. And it worked :)
The table was shown at 100% design and accumulated a lot of nice comments - especially the wooden version.
ARC table in production - in metal or wood - After 6 months of development and prototyping, ARC table is now in production - in metal and wood. Detailed information here: www.pured.co.uk - my design studio web page. Main idea behind the design is to have only one and the same detail - ARC. And it worked :)
The table was shown at 100% design and accumulated a lot of nice comments - especially the wooden version.
ARC table in production - in metal or wood - After 6 months of development and prototyping, ARC table is now in production - in metal and wood. Detailed information here: www.pured.co.uk - my design studio web page. Main idea behind the design is to have only one and the same detail - ARC. And it worked :)
The table was shown at 100% design and accumulated a lot of nice comments - especially the wooden version.
ARC table in production - in metal or wood - After 6 months of development and prototyping, ARC table is now in production - in metal and wood. Detailed information here: www.pured.co.uk - my design studio web page. Main idea behind the design is to have only one and the same detail - ARC. And it worked :)
The table was shown at 100% design and accumulated a lot of nice comments - especially the wooden version.
ARC table in production - in metal or wood - After 6 months of development and prototyping, ARC table is now in production - in metal and wood. Detailed information here: www.pured.co.uk - my design studio web page. Main idea behind the design is to have only one and the same detail - ARC. And it worked :)
The table was shown at 100% design and accumulated a lot of nice comments - especially the wooden version.
ARC table in production - in metal or wood - After 6 months of development and prototyping, ARC table is now in production - in metal and wood. Detailed information here: www.pured.co.uk - my design studio web page. Main idea behind the design is to have only one and the same detail - ARC. And it worked :)
The table was shown at 100% design and accumulated a lot of nice comments - especially the wooden version.
ARC table in production - in metal or wood - After 6 months of development and prototyping, ARC table is now in production - in metal and wood. Detailed information here: www.pured.co.uk - my design studio web page. Main idea behind the design is to have only one and the same detail - ARC. And it worked :)
The table was shown at 100% design and accumulated a lot of nice comments - especially the wooden version.
ARC table in production - in metal or wood - After 6 months of development and prototyping, ARC table is now in production - in metal and wood. Detailed information here: www.pured.co.uk - my design studio web page. Main idea behind the design is to have only one and the same detail - ARC. And it worked :)
The table was shown at 100% design and accumulated a lot of nice comments - especially the wooden version.
The LASTIKA chair for LAGO - A simple, minimalistic chair with metal tubular frame and 40 elastic belts.
It was presented now at Milan Design Week and Salone Mobile Milan 2011 at the Lago stand.
In short:
Lastika resembles a flower, in fact a daisy. When you sit in it, youare supported by forty elastics that make up the seat and create arocking sensation, although the structure of the seat is in fact verystable. It is a fun and comfortable seat, very lightweight and …stackable!
Photography by Pietro Firrincieli
The LASTIKA chair for LAGO - A simple, minimalistic chair with metal tubular frame and 40 elastic belts.
It was presented now at Milan Design Week and Salone Mobile Milan 2011 at the Lago stand.
In short:
Lastika resembles a flower, in fact a daisy. When you sit in it, youare supported by forty elastics that make up the seat and create arocking sensation, although the structure of the seat is in fact verystable. It is a fun and comfortable seat, very lightweight and …stackable!
Photography by Pietro Firrincieli
The LASTIKA chair for LAGO - A simple, minimalistic chair with metal tubular frame and 40 elastic belts.
It was presented now at Milan Design Week and Salone Mobile Milan 2011 at the Lago stand.
In short:
Lastika resembles a flower, in fact a daisy. When you sit in it, youare supported by forty elastics that make up the seat and create arocking sensation, although the structure of the seat is in fact verystable. It is a fun and comfortable seat, very lightweight and …stackable!
Photography by Pietro Firrincieli
The Curly chair for Lago - Curly is a chair that takes advantage of the resistance of fabric for its seat. The frame is reduced, there are neither arms nor a back rest and the weight of the body is supported by its extremely resistant fabric. The canvas version is perfect for outdoor use.
The Curly chair for Lago - Curly is a chair that takes advantage of the resistance of fabric for its seat. The frame is reduced, there are neither arms nor a back rest and the weight of the body is supported by its extremely resistant fabric. The canvas version is perfect for outdoor use.
The Curly chair for Lago - Curly is a chair that takes advantage of the resistance of fabric for its seat. The frame is reduced, there are neither arms nor a back rest and the weight of the body is supported by its extremely resistant fabric. The canvas version is perfect for outdoor use.
The Hedgehog and Peacock pencil holders produced - The Hedgehog and Peacock pencil holders produced and ready – hope you enjoy them as i did :)
The material is MDF in those, but also available in plywood – 8mm thickness, can hold up to 19 pencils.
Easy to be branded and perfect for gift – available for sale.
You can see the concept design here: http://velichkovelikov.com/?p=515
The Hedgehog and Peacock pencil holders produced - The Hedgehog and Peacock pencil holders produced and ready – hope you enjoy them as i did :)
The material is MDF in those, but also available in plywood – 8mm thickness, can hold up to 19 pencils.
Easy to be branded and perfect for gift – available for sale.
You can see the concept design here: http://velichkovelikov.com/?p=515
The Hedgehog and Peacock pencil holders produced - The Hedgehog and Peacock pencil holders produced and ready – hope you enjoy them as i did :)
The material is MDF in those, but also available in plywood – 8mm thickness, can hold up to 19 pencils.
Easy to be branded and perfect for gift – available for sale.
You can see the concept design here: http://velichkovelikov.com/?p=515
The Hedgehog and Peacock pencil holders produced - The Hedgehog and Peacock pencil holders produced and ready – hope you enjoy them as i did :)
The material is MDF in those, but also available in plywood – 8mm thickness, can hold up to 19 pencils.
Easy to be branded and perfect for gift – available for sale.
You can see the concept design here: http://velichkovelikov.com/?p=515
The Hedgehog and Peacock pencil holders produced - The Hedgehog and Peacock pencil holders produced and ready – hope you enjoy them as i did :)
The material is MDF in those, but also available in plywood – 8mm thickness, can hold up to 19 pencils.
Easy to be branded and perfect for gift – available for sale.
You can see the concept design here: http://velichkovelikov.com/?p=515
The Hedgehog and Peacock pencil holders produced - The Hedgehog and Peacock pencil holders produced and ready – hope you enjoy them as i did :)
The material is MDF in those, but also available in plywood – 8mm thickness, can hold up to 19 pencils.
Easy to be branded and perfect for gift – available for sale.
You can see the concept design here: http://velichkovelikov.com/?p=515
The Hedgehog and Peacock pencil holders produced - The Hedgehog and Peacock pencil holders produced and ready – hope you enjoy them as i did :)
The material is MDF in those, but also available in plywood – 8mm thickness, can hold up to 19 pencils.
Easy to be branded and perfect for gift – available for sale.
You can see the concept design here: http://velichkovelikov.com/?p=515
PUZZLE modular bookshelf system - One module bookshelf system made in Polyethylene, Polypropylene, MDF, Plywood or solid wood. Attaching is very simple – there is a nut integrated inside each side and they are connected with bolt without a head (hidden)
A lot of bookshelf configurations.
It si also possible – in the polyethylene version – to have integrated light in the module.
First polyethylene samples are ready, soon will have them in real colors.
PUZZLE modular bookshelf system - One module bookshelf system made in Polyethylene, Polypropylene, MDF, Plywood or solid wood. Attaching is very simple – there is a nut integrated inside each side and they are connected with bolt without a head (hidden)
A lot of bookshelf configurations.
It si also possible – in the polyethylene version – to have integrated light in the module.
First polyethylene samples are ready, soon will have them in real colors.
PUZZLE modular bookshelf system - One module bookshelf system made in Polyethylene, Polypropylene, MDF, Plywood or solid wood. Attaching is very simple – there is a nut integrated inside each side and they are connected with bolt without a head (hidden)
A lot of bookshelf configurations.
It si also possible – in the polyethylene version – to have integrated light in the module.
First polyethylene samples are ready, soon will have them in real colors.
PUZZLE modular bookshelf system - One module bookshelf system made in Polyethylene, Polypropylene, MDF, Plywood or solid wood. Attaching is very simple – there is a nut integrated inside each side and they are connected with bolt without a head (hidden)
A lot of bookshelf configurations.
It si also possible – in the polyethylene version – to have integrated light in the module.
First polyethylene samples are ready, soon will have them in real colors.
PUZZLE modular bookshelf system - One module bookshelf system made in Polyethylene, Polypropylene, MDF, Plywood or solid wood. Attaching is very simple – there is a nut integrated inside each side and they are connected with bolt without a head (hidden)
A lot of bookshelf configurations.
It si also possible – in the polyethylene version – to have integrated light in the module.
First polyethylene samples are ready, soon will have them in real colors.
PUZZLE modular bookshelf system - One module bookshelf system made in Polyethylene, Polypropylene, MDF, Plywood or solid wood. Attaching is very simple – there is a nut integrated inside each side and they are connected with bolt without a head (hidden)
A lot of bookshelf configurations.
It si also possible – in the polyethylene version – to have integrated light in the module.
First polyethylene samples are ready, soon will have them in real colors.
PUZZLE modular bookshelf system - One module bookshelf system made in Polyethylene, Polypropylene, MDF, Plywood or solid wood. Attaching is very simple – there is a nut integrated inside each side and they are connected with bolt without a head (hidden)
A lot of bookshelf configurations.
It si also possible – in the polyethylene version – to have integrated light in the module.
First polyethylene samples are ready, soon will have them in real colors.
gLike
Furniture
