Original concept, with insert to adjust razor blade up and down 1/8 inch from 3/8ths to 1/2 inch.
Hand model (edges pinched into corners to trace profiles), tracing, & radius gauges.
Bottom (left) & Top (right) profiles for trimming tool.
Offset sketches by 1 inch and connected with measured radiuses.
Lofted solid with various fillets.
Concept # 2 - two in one, like original concept, where 1/8th inch spacer allows blade to cut at 3/8th or 1/2 inches. Screws from top. Not favored, as the blade is very near the edges when set at 1/2 inch.
Concept # 3 - Bolted together like a utility knife from the bottom. This version also has the 1/8 inch spacer, which was ultimately abandoned.
Concept 4a - This version is the same as Concept 3, except it is specific to the 3/8ths inch height. This is the first of two final designs.
Concept 4b - This version is the same as Concept 3, except it is specific to the 1/2 inch height. This is the second of two final designs.
Finished product for production. 3D printed on Fortus 400.
gLike
Trimming Tool

Used for trimming foam.

John Gates
Industrial Designer Lawrence, KS