Chuck Extender - The Chuck Extender allows the user to perform drilling, grinding and polishing tasks in areas normally unreachable by driver alone.
The sliding aluminum handle lets the user apply greater lateral force without putting undo strain on the driver chuck. This is especially useful when cleaning a bbq or grinding the surface rust off an exposed metal surface.
Flashlight Holder - The Flashlight holder will grip anything from the smallest LED light to a 2-1/2" diameter flashlight, or a corded trouble light. The strong 1" rare-earth magnet in the holder base
(covered with a high-friction pad) will let you secure a light to a fender for a tire change, inside the hood for motor work, on the car roof as a warning light, etc. Adjustable to any angle, the holder folds to fit a 1"x2"x4-1/2" storage space.
Michelangelo Paint Can Holder - The Michelangelo Paint Can Holder fits all current North American stepladders 6' or taller and all D-rung ladders, whether extended or doubled.
Easy to move with one hand from step to step, it also has a strong magnetic brush holder mounted directly over the open can so you always have a hand free to grip the ladder. Cans are easily attached using a specially designed mono-polymer belt to accommodate both small and large containers.
Thread I.D. - The Thread I.D. has a plate tapped for 10 National Coarse sizes (1-64 to 1/4-20), 10 National Fine sizes (1-72 to 1/4-28) and 8 Metric Coarse sizes from M1.6 to M6.0. to identify unknown machine screws or bolts. It also has matched threaded knobs to identify unknown threaded holes and nuts.
Along the length of each side of the Thread I.D. is an imperial and metric ruler to identify screw / bolt length.
Astrolabe - This functional reproduction is presented as part of an award given by the Nature Conservancy of Canada for excellence in stewardship.
The Nature Conservancy of Canada is a private, non-profit organization working for the direct protection of Canada's biodiversity through the purchase,donation or the placing of conservation easements on ecologically significant land.
The production was a limited run of 100 units.
Chestnut Tools Magnetic Sweep - The Chestnut ToolsTM Magnetic Sweep can pick up ~2 pounds of nuts, bolts, scews, or anything that is ferromagnetic. It can be used to reach steel objects in areas with only 2" heaight clearance. The telescopic handle can be extended from 22", for easy storage, to 47" at full extention.
The magnetic components are sealed inside a waterproof plastic housing which makes the Chestnut ToolsTM Magnetic Sweep ideal for retrieving steel objects from lakes or pools.
gLike
Consumer