Cradle Weld Model - I had collected a few bend elbows, 2 profiles of each side of the cradle and welded up the various joints.
Cradle Weld Model - I had collected a few bend elbows, 2 profiles of each side of the cradle and welded up the various joints.
Cradle Weld Model - I had collected a few bend elbows, 2 profiles of each side of the cradle and welded up the various joints.
Cradle Weld Model - I had collected a few bend elbows, 2 profiles of each side of the cradle and welded up the various joints.
Cradle Weld Model - I had collected a few bend elbows, 2 profiles of each side of the cradle and welded up the various joints. these sections were particularly difficult, I will have to re-dress them
Cradle Weld Model - I had collected a few bend elbows, 2 profiles of each side of the cradle and welded up the various joints.
Cradle Weld Model - I had collected a few bend elbows, 2 profiles of each side of the cradle and welded up the various joints. This was by far the most successful joint, due to the oxidation of the mild steel it has blended extremely well...
Cradle Weld Model - I had collected a few bend elbows, 2 profiles of each side of the cradle and welded up the various joints.
Cradle Weld Model - I had collected a few bend elbows, 2 profiles of each side of the cradle and welded up the various joints.
Cradle Weld Model - I had collected a few bend elbows, 2 profiles of each side of the cradle and welded up the various joints.
Cradle Weld Model - I had collected a few bend elbows, 2 profiles of each side of the cradle and welded up the various joints.
Cradle Welded Model - I had collected a few bend elbows, 2 profiles of each side of the cradle and welded up the various joints.
Cradle Welded Model - I had collected a few bend elbows, 2 profiles of each side of the cradle and welded up the various joints.
Cradle Welded Model - I had collected a few bend elbows, 2 profiles of each side of the cradle and welded up the various joints.
Cradle Welded Model - I had collected a few bend elbows, 2 profiles of each side of the cradle and welded up the various joints.
gLike
Welding and Fabrication
James Cope
Project Engineer at Byworth Boilers Ltd. Halifax, United Kingdom