solidWork - bottom right ( link done on Solid Work 2003)
bottom life ( lower inner punch.Solid Work 2000 work experience )
top right ( plate bearing on Solid Work 2005 work experience )
top life ( retainer ring on Solid Work 2005 work experience)
top center (gland on Solid Work 2005 work experience)
SolidWork 2005 - top lift mol_test_one_ assmely (work experience solidwork 2005 )
right top coyote hanging pip(work experience solidwork 2005 )
bottom lift mol_test_one work experience solidwork 2005 )
hat box with solidWork 2005 - This was do on solidWork 2005 (work experience)
_ PVC Tee 6in. Soc - This was do on solidWork 2009(work experience)
Channel-C15x33 - This was do on solidWork 2009(work experience)
0_PVC 90 6in SxS. - This was do on solidWork 2009(work experience
MIL SPEC INDUCTORS - This was do on solidWork 2005
SolidWork 2010 - block drawing using SolidWork 2010
SolidWork 2010 - block drawing using SolidWork 2010
Popcron bowl - Uesing SoildWorks 2005
Cavity-Main - This was do on solidWork 2012 (work experience 2D
Core Retainer - This was do on solidWork 2012 (work experience 2D
Anti Spin Inser - This was do on solidWork 2012 (work experience 2D
Upper Cavity - This was do on solidWork 2012 (work experience 2D
Upper Core - This was do on solidWork 2012 (work experience 2D
Legs - This was do on solidWork 2012 (work experience 2D
Anti Spin Insert - This was do on solidWork 2012 (work experience 2D
Cavity-Main - This was do on solidWork 2012 (work experience 2D
SwitchActuator - This was do on solidWork 2012 (work experience 2D
Water Manifold - This was do on solidWork 2012 (work experience 2D
This was do on solidWork 2012 (work experience 2D
LRU HLD HIGH-POWER LOW-NOISE DIPLEXER SWIFT BROADBAND - This was do on solidWork 2009 (work experience
LRU_SBCM CONFIGURETION MODULE SWIFT BROADBAND SYSTEM - This was do on solidWork 2009 (work experience
LRU HLD HIGH-POWER LOW-NOISE DIPLEXER SWIFT BROADBAND - This was do on solidWork 2009 (work experience
LRU_SBCM CONFIGURETION MODULE SWIFT BROADBAND SYSTEM - This was do on solidWork 2009 (work experience
BRACKET, DISCONNECT
using SolidWork2009
BRACKET, DISCONNECT
using SolidWorks 2009
BRACKET, DISCONNECT
using SoildWorks 2009
SolidWorks 2013 Transmission Belt-SimulationXpress Study.analysis and Transmission Belt
Test Tray done on Solidworks 2013
Spur Gear SolidWork 2013
Threaded Insert SolidWorks 2013
External Threads SolidWorks 2013
C_clamp SolidWorks 2013
SolidWork 2013
Latch SolidWork 2013
SPACER SolidWork 2013
PULLEY SPACER SolidWork 2013
Pin Jaw SolidWork 2013
Alignment Pin STD
Solidwork 2017
AD Nut
Solidworks 2017
Alignment Rod
Solidworks 2017
Sensor Support Ass_y
Solidworks 2017
Turntable Bushing
Solidwork 2017
Stop Plate
Solidwork 2017
Slide Gusset
Solidwork 2017
ROLLER
Solidwork 2017
Guide Extension 2
Solidwork 2017
Guide Extension 1
Solidwork 2017
Chuck Spacer
Solidwork 2017
Grommet Sleeve
SOLIDWORKS 2017
Drive Sprocket
Solidwork 2017
IDLER SPROCKET
Solidwork 2017
END SUPPORT
Solidworks 2017
J-shape
Description:
3D modeling of a J-shaped massage tool, much like a Theracane only smaller in dimensions. The tool should be modeled as close as possible to the attached images. The straight portion of the J-shape is approximately 10 inches long and 3/8in in diameter. The hook portion of the tool should form an approximately 180 degree arc and terminate in spherical end of 9/16in diameter. The handle, at the top of the J-shape, should be approximately 3/4in in diameter. The attached jpg images are of the actual tool that I would like modeled and should give you a good idea of it's dimensions. The png file should also provide a good reference. Thanks.
Software:
1. SolidWorks 2017
GUIDE L 4.00 IN
Solidwork 2017
SUPPORT
Solidwork 2017
CENTER BAR
Solidwork 2017
DOWL PIN
Solidwork 2017
SUPPORT SPACER
Solidwork 2017
SPROCKET HUB
Solidwork 2017
Spacer
Solidworks 2017
REFLECTOR MOUNTING
Solidwork 2017
SENSOR MOUNT
Solidwork 2017
DISCHARGE PLATORM
Solidwork 2017
INSULATOR
Solidwork 2017
BASE
Solidwork 2017
DRIVESHAFT (OUTPUT)
Solidwork 2017
END PLATE
Solidwork 2017
TAKEUP SHAFT
Solidwork 2017
RECOIL TERMINAL BLOCK LEFT
Solidwork 2017
NUT SLEEVE
Solidwork 2017
ENCODER ENCLOSURE
Solidwork 2017
CROSS PLATE
Solidwork 2017
Gasket MTG PLATE 12.0X 6
Solidworks 2018
Tool Plate
Solidworks 2017
Takeup Shaft
Solidworks 2017
Sensor Support Ass’y
Solidworks 2017
Tool Plate
Solidworks 2017
Stop
Solidwork 2017
Drive Sprocket
Solidworks 2017
Valve Stem
SolidWorks 2017
V ANVIL-85MM 120 DEG SOLIDWORKS 2020
V ANVIL-45MM 120 DEG SOILDWORKS 2020
DRAN PUMP SOILDWORKS 2020
DIMOND SPOT ANVIL FOR THIN METAL SOLIDWORKS 2020
Cable 12V IN SOLIDWORKS 2020
ANIVIL-NARROW W 732” DIA TIP ANVIL SOLIDWORKS 2020
AUTOMOTIBVE STUD Solidwork 2023
gLike
SolidWork
solidworks
