Toaster design based on Harley Davidson. The biggest design influence taken from Harley on this toaster was from the gas tank. There is also a "fuel level" for the level of cooking for the toast. This toaster started off as a piece of pink foam and was cnc'd on a 3 axis router and then the two halves were joined together and fiberglassed. Sleeves were made to go to the internals and the feet were milled out to resemble pistons.
Toaster design based on Harley Davidson. The biggest design influence taken from Harley on this toaster was from the gas tank. There is also a "fuel level" for the level of cooking for the toast. This toaster started off as a piece of pink foam and was cnc'd on a 3 axis router and then the two halves were joined together and fiberglassed. Sleeves were made to go to the internals and the feet were milled out to resemble pistons.
Toaster design based on Harley Davidson. The biggest design influence taken from Harley on this toaster was from the gas tank. There is also a "fuel level" for the level of cooking for the toast. This toaster started off as a piece of pink foam and was cnc'd on a 3 axis router and then the two halves were joined together and fiberglassed. Sleeves were made to go to the internals and the feet were milled out to resemble pistons.
Toaster design based on Harley Davidson. The biggest design influence taken from Harley on this toaster was from the gas tank. There is also a "fuel level" for the level of cooking for the toast. This toaster started off as a piece of pink foam and was cnc'd on a 3 axis router and then the two halves were joined together and fiberglassed. Sleeves were made to go to the internals and the feet were milled out to resemble pistons.
Toaster design based on Harley Davidson. The biggest design influence taken from Harley on this toaster was from the gas tank. There is also a "fuel level" for the level of cooking for the toast. This toaster started off as a piece of pink foam and was cnc'd on a 3 axis router and then the two halves were joined together and fiberglassed. Sleeves were made to go to the internals and the feet were milled out to resemble pistons.
Toaster design based on Harley Davidson. The biggest design influence taken from Harley on this toaster was from the gas tank. There is also a "fuel level" for the level of cooking for the toast. This toaster started off as a piece of pink foam and was cnc'd on a 3 axis router and then the two halves were joined together and fiberglassed. Sleeves were made to go to the internals and the feet were milled out to resemble pistons.
Toaster design based on Harley Davidson. The biggest design influence taken from Harley on this toaster was from the gas tank. There is also a "fuel level" for the level of cooking for the toast. This toaster started off as a piece of pink foam and was cnc'd on a 3 axis router and then the two halves were joined together and fiberglassed. Sleeves were made to go to the internals and the feet were milled out to resemble pistons.
Toaster design based on Harley Davidson. The biggest design influence taken from Harley on this toaster was from the gas tank. There is also a "fuel level" for the level of cooking for the toast. This toaster started off as a piece of pink foam and was cnc'd on a 3 axis router and then the two halves were joined together and fiberglassed. Sleeves were made to go to the internals and the feet were milled out to resemble pistons.
Toaster design based on Harley Davidson. The biggest design influence taken from Harley on this toaster was from the gas tank. There is also a "fuel level" for the level of cooking for the toast. This toaster started off as a piece of pink foam and was cnc'd on a 3 axis router and then the two halves were joined together and fiberglassed. Sleeves were made to go to the internals and the feet were milled out to resemble pistons.
Toaster design based on Harley Davidson. The biggest design influence taken from Harley on this toaster was from the gas tank. There is also a "fuel level" for the level of cooking for the toast. This toaster started off as a piece of pink foam and was cnc'd on a 3 axis router and then the two halves were joined together and fiberglassed. Sleeves were made to go to the internals and the feet were milled out to resemble pistons.
Flames being taped off - These flames were done by hand with some 1/4" tape. The rest of the toaster was taped off then and it was painted. This process was then repeated for the grey paint.
Flames being taped off - These flames were done by hand with some 1/4" tape. The rest of the toaster was taped off then and it was painted. This process was then repeated for the grey paint.
Flames being taped off - These flames were done by hand with some 1/4" tape. The rest of the toaster was taped off then and it was painted. This process was then repeated for the grey paint.
Toaster build - Just some of the different steps and process done while building the toaster model.
Toaster build - Just some of the different steps and process done while building the toaster model.
Toaster build - Just some of the different steps and process done while building the toaster model.
Toaster build - Just some of the different steps and process done while building the toaster model.
Toaster build - Just some of the different steps and process done while building the toaster model.
Toaster build - Just some of the different steps and process done while building the toaster model.
Toaster build - Just some of the different steps and process done while building the toaster model.
gLike
Toaster