George Terrell

Gear Reducer - This is a gear reducer designed for a mechanical system using AutoDesk Inventor. This gear reducer could be used in a mechanical system to reduce the mechanical speed while increasing the overall torque.

Tool Punch - This tool punch was drawn using AutoDesk Inventor. The tool punch is used in stamping designs on a surface.

Weedeater - This weedeater was modeled using AutoDesk Maya Unlimited.

3D Wine Racks - These two wine racks were sketched using Rhinoceros. These renderings were used to show concepts before prototyping. The top wine rack was a vertical design incorporating a lazy susan with the bottles resting upside down, while the bottom wine rack was a stationary piece with the bottles resting horizontally. (See the next picture for the actual pieces created)

Wine Racks - Here are pictures of the completed wine racks. I made these using a CNC router.

3D C-Clamp - Here is a quick prototype rendering from a c-clamp I modeled using Rhinoceros. (See the next picture for the actual piece)

C-Clamp - This picture is of the completed c-clamp project. I made this piece using a milling machine and a lathe.

LMA Tube Concepts - This is a Laryngeal Mask Airways Tube (LMA Tube) that was designed for a product design project. I worked with a medical college to redesign the LMA Tube. The top and bottom pictures are the clay models that were made showing the proposed alterations. The middle picture is the tube that was currently being used. (See the next pictures for the 3D model)

3D LMA Tube - I designed this 3D model of the LMA Tube using the Ashlar-Vellum Cobalt program. The bottom picture demonstrates how the LMA Tube is used to maintain a clear airway in an unconscious patient.

2D Kneeder Layout - I drafted this kneeding machine layout to accompany a larger machine assembly using AutoDesk AutoCAD. (The final production piece is shown in the next picture)

Kneeder Picture - This is the final production piece that was built from the 2D layouts I created in AutoCAD.

Tool Vice Layout - This is the engineering layout of an any-angle tool vice I designed using AutoDesk Inventor.

Tool Vice - This is the assembled 3D model of the any-angle tool vice I designed using AutoDesk Inventor.

2D Wall Plans - This 2D layout was created to show the wall plans of a two-story ranch style home using AutoDesk AutoCAD.

2D Elevations - These 2D elevation views were created for a two-story ranch style home using AutoDesk AutoCAD.